The fasteners are 3M ™ adhesive microencapsulated curing adhesive at room temperature, which increase the anchoring of threaded fasteners. These adhesives are designed, to be coated connectors, and dried; They remain dormant until shearing of the connector to the nut or a threaded recess of the capsule degrades and allows the adhesive to cure.
Typical applications include connectors into the engine compartment or design elements related to safety.
Plastics susceptible to cracking under the pressure should not be used near the fastener 3M
2.353 (Blue) Normal temperature Formula. Suitable for applications, in which the operating temperature is not higher than 116 ° C (240 ° F) *.
2510 (Orange) The highest temperature formulated for application, in which the operating temperature can be constantly reach 149 ° C (300 ° F), or intermittently
do 204 ° C (400 ° F).
* Although the functional operating temperature upper limit 2353/4844
the 116 ° C (240 ° F), the product can be exposed to temperatures
higher than 177 ° C (350 ° F). At higher temperatures the
loss of adhesion, but without damaging the adhesive. When the temperature is
resumes, it regain traction.
This is a normal formula of temperature, which is intended for application, where the service
The temperature must not exceed 116 ° C (240 ° F).
Tel: +420 495 221 331
Fax: +420 495 221 334